Canon Printers are known for their versatile printing and easy troubleshooting. Printers are technical equipment; you cannot expect them to work flawlessly for their lifetime. b200 is one such popular error code often faced by Canon printer users due to Canon printer may stop printing. Here you will get the simple and straightforward troubleshooting steps to deal with Canon printer error b200.

If you have seen the error code b200 popping up on your screen while you were busy printing an important document from your Canon printer, this can be due to a potentially catastrophic error with the device but you cannot just throw off your device as printers are expensive and you must read about the methods that can help you out to fix this error. Also, this guide will help you out to deal with error b200 on most of the Canon printer models such as mx922, etc.

What Causes the Canon B200 Error?

The error code B200 mostly occurs when your Canon printer has a faulty printhead. The printhead is an important component and cannot be ignored either as it transfers the ink from the cartridges on the paper. So it is one of the most important functions of a printer and if your printer is of cheap quality, printheads can be problematic.

Solutions to Fix the Canon Printer Error B200

Now, to fix a faulty printhead, there are several things you can try and most of them have been listed below:

1. Reset the Canon Printer

You should start the troubleshooting by resetting your Canon printer. To do that:

  • Unplug your device and leave it like that for around half an hour. 
  • This will allow the printer to cool down and will also reset its components to their proper positions.
  • Once the 30 minutes are over, turn it back on like usual.

2. Clean the Printhead

As the error revolves around the printhead, your next step to eliminate the B200 error from your Canon printer should be to clean the printhead. There are certain device maintenance options that you have to use to run the cleaning cycle and that will help if the printhead is clogged. Make sure the printhead is completely dry before you put it back

3. Eliminate the Obstructions

The next possibility due to which you are facing the error B200 on your Canon printer is there can be something that is disrupting the entire printing process and the connection to the printhead. So open the door of your printer and then take off the printhead carefully. Take it out of your printer and then reposition it again; check if it helps.

4. Replace the Tank holder

The next important tip to fix the error B200 is to replace the tank holder as in some of the cases, replacing the tank holder with a new one can also help in fixing the issue.

5. Replace the Cartridges

Error B200 can even occur when your Canon printer has problematic cartridges. So if you find out the ink cartridges are faulty, you must replace it with a new one. After you have replaced the cartridge, you must do an extensive nozzle check to ensure that the desired cartridge has been replaced. 

6. Use the Power and Copy buttons

For some users, pressing the Power and Copy buttons a couple of times has also worked in fixing the error code B200. Doing this will start the printer and then you just have to do a nozzle check, deep cleaning as well as printer alignment.

7. Take Off the Old Ink

It is possible that the ink has turned hardened inside the print head and you can fix the error by simply taking that old ink out. For that, you can run the printhead under hot tap water and wait till you see clean water coming out. Then dry the printhead using a paper towel and reposition it carefully.

So I hope by the end of this guide you will know how to fix canon support error code b200.

×